Building Envelope: Solutions to Design Sustainable Buildings


Event Info

DateTuesday,
September 19th 2017

Registration7:45 am
Program end5:45 pm
Credits earned8 OAA Structured Learning hours
8 CAGBC/GBCI/LEED
8 AIA credits

Day program*

7:45 am

Registration & Breakfast

8:00 am

Semi-underground waste management solution

8:00 am - 9:00 am

Solid Waste & Recycling – The Semi-Underground Advantage For the past 24-years, semi-underground containers for solid waste & recycling collection have shifted the paradigm of traditional waste and recycling systems around the world. This course focuses on the many advantages of semi-underground collection, and the benefits that they bring from a site design perspective. We will focus on the key value features of appearance, convenience, and capacity. We will further elaborate on how these key features can increase your available building space, allow for additional parking amenities, create better traffic flow, and allow for more landscaping opportunities, all while creating a more useable and safer waste and recycling collection system. And did we mention that semi-underground systems can contribute to your LEED designation while lowering your capital and operating costs?

  • Credit type: LU
  • AIA# | USGBC# 0920008855
  • Provider: Molok North America Ltd.
  • Presenter: Brian Page
  • Biography: Brian joined the Molok® North American Team in January 2012 as the Vice President of Municipal Affairs. He holds certifications with the Canadian Society of Landscape Architects, Ontario Association of Landscape Architects, Ontario Association of Certified Engineering Technicians and Technologist, and the Ontario Municipal Management Institute as a Level 3 Certified Municipal Manager. Brian is also a member of the Board of Directors for CPTED Ontario. Brian’s previous employment was with the City’s of Oshawa and Kitchener, where he worked in both the Parks and Planning Departments for more then 36 years. His job duties mainly revolved around the design of parks and site plan development. Brian’s final position with the City of Kitchener was the Supervisor of Site Plan Development.
9:00 am

Use of Snow Retention Devices: Science or Science Fiction ?

9:00 am - 10:00 am

Discover the art and science of snow control and its effects, such as snow migration on rooftops of structures. Learn about the common myths and misperceptions regarding snow retention, as well as the do's and don'ts of retention devices, product selection, and site specifics.

  • Credit type: HSW
  • AIA# MRIL1410 | USGBC# 0920007661
  • Provider: S-5! Metal Roof Innovations, Ltd.
  • Presenter: Harry Lubitz, CSI, CDT
  • Biography: Excess of 25 years presenting training courses to architects on building materials.
10:00 am

Break

10:15 am

Code Compliant Exterior Systems for Wood Framed Building Envelopes

10:15 am - 11:15 am

This course investigates the most recent code changes emphasizing building envelope performance. We will explore next generation integrated solutions that simultaneously provide protection against moisture penetration, air leakage, and thermal bridging. Installation benefits and on-site quality control issues related to multi-solution integrated systems will also be evaluated.

  • Credit type: HSW
  • AIA# HEW 505 | USGBC# 0920011922
  • Provider: Huber Eng. Woods
  • Presenter: Mike Moriarty
  • Biography:
11:15 am

Benefits of Impermeable Concrete & Permanent Impermeable Repair Materials

11:15 am - 12:15 pm

This Program addresses the impact of traditional & impermeable concrete inside & outside the building envelope. It discusses methods to improve longevity and consequently sustainability of all concrete applications. It provides a solution to the moisture & flooring problems as well as water and damp proofing concrete. Techniques and materials used to permanently repair concrete are discussed.

  • Credit type: HSW
  • AIA# VLMGK1011260 | USGBC# 0920007659
  • Provider: Specialty Products Group
  • Presenter: Scott Bergsbaken
  • Biography:
12:15 pm

Lunch Sponsored by Laurier Glass & FSR

1:15 pm

“First Impressions Matter” - Specifying Automatic Pedestrian Doors

1:15 pm - 2:15 pm

This program covers the selection and specification of Automatic Doors to meet most applications, including types of doors and activators, glazing and hardware, ADA requirements, ANSI and BHMA standards in detail, safety, security, and specialty applications..

  • Credit type: LU
  • AIA# NAB003 | USGBC# 0920012224
  • Provider: NABCO Canada Inc.
  • Presenter: Kayle Moore
  • Biography:
2:15 pm

Making Sense of Sealants

2:15 pm - 3:15 pm

Participants will learn about the different families of sealants and how to choose the correct product for each application. We will discuss the effect of UV light on sealants and the difference between structural or non structural silicon sealant. And finally, the importance of surface preparation before sealing joints.

  • Credit type: HSW
  • AIA# ADFAST-001 | USGBC# 0920010342
  • Provider: America Training Solution
  • Presenter: Nicolas Choquet
  • Biography:
3:15 pm

Break

3:30 pm

Design an Effective and Sustainable Building Envelope With Spray Polyurethane Foam

3:30 pm - 4:30 pm

Points Presented: History, Actual generation, and polyurethanes classification Standards: CAN/ULC S705.1 Material CAN/ULC S705.2 Application Quality Assurance program / Certification, CUFCA Physical Properties of Polyurethane Spray Foam Long term thermal resistance (LTTR) Initial value Test Reports: CCMC Evaluation #13244-L • AIR INS Inc. Water vapor permeance testing • AIR INS Inc. Air barrier materials testing • Dr. John Straube, Results for wood framing construction with spray foam, without vapor barrier • Exterior insulation basement system, NRC Summary Report • Adhesion quality, CMHC report Explanation of typical conception details for Polyurethane Foam How to build an effective and sustainable building envelope with minimum materials Environmental criteria, Leed and Sustainability

  • Credit type: LU
  • AIA# NA | USGBC#
  • Provider: Demilec
  • Presenter: Dale Hall
  • Biography:
4:30 pm

Fire Rated Hollow Metal Doors

4:30 pm - 5:30 pm

Participant will develop a better understanding of fire rated hollow metal doors. Seminar includes discussions about solutions and applications. Learning objectives: Describe the characteristics of the product. Determine the different options available. Expose the benefits and the limitations of each option. Select the right product for the right application.

  • Credit type: HSW
  • AIA# HMD002 | USGBC# 0920007660
  • Provider: De La Fontaine
  • Presenter: Guillaume Gauthier
  • Biography: Product manager and steel door and frame expert at DE LA FONTAINE INDUSTRIES.
5:30 pm

End of Program

*This Agenda is final but is subject to updates, additions and changes.

X